It’s great that your child knows to come find you if they have a cut. But, if they’re wandering through the house looking for mum, they may be tracking blood all over your carpets – not so great.
Blood is a notoriously tricky stain to deal with when it comes to fabric, especially if it has already soaked in and dried.
If you’re dealing with blood stains on your carpet or upholstery, and want to know how to remove blood stains from carpet, here’s how you can use 1001 to remove it easily. That is, after putting plasters on knees, of course!
Removing Fresh Blood Stains
Immediate Action Needed: Fresh blood stains require prompt attention. The longer they linger, the more challenging they become to remove.
Penetration: Blood can seep deep into carpet fibres, making it stubborn to lift.
Colour and Protein Content: Blood contains proteins that bind to fibres, leaving behind visible marks.
Step #1: Blot and Soak:
Use a piece of kitchen roll to soak up the extra liquid from the stain.
Step #2: Apply 1001 Carpet Care Stain Remover:
Spray the affected area with 1001 Carpet Care Stain Remover.
Wait for 5 minutes to allow it to work.
Step #3: Massage the Stain:
Take a colour-fast cloth and massage the 1001 Carpet Care Stain Remover into the stain.
Step #4: Remove Excess Liquid:
Use a dry cloth to remove any excess liquid.
Step #5: Let It Dry:
Allow the area to air dry.
Step #6: Repeat If Needed:
If the stain persists, repeat the process.
Step #7: Vacuum:
Once the stain is gone and the carpet is dry, vacuum the area.
The Challenge of Dried Blood Stains
Challenge #1: Hardened and Set-In:
Dried blood stains have had time to set into the carpet fibres.
They can be more resistant to removal than fresh stains.
Challenge #2: Colour Change:
Blood contains pigments that can alter the colour of your carpet.
It’s essential to address dried stains promptly to prevent permanent discoloration.
Challenge #3: Protein Bonding:
Blood proteins bind to the fibres, making removal challenging.
How to Deal With Dried Blood Stains:
We need a solution that breaks down these proteins effectively.
Step #1: Blot with Cold Water:
Blot the dried stain with cold water to rehydrate it.
Step #2: Apply 1001 Carpet Care Stain Remover:
Spray the dried stain with 1001 Carpet Care Stain Remover.
Wait for 5 minutes.
Step #3: Massage the Stain:
Use a colour-fast cloth to massage the 1001 Carpet Care Mousse into the stain.
Step #4: Remove Excess Liquid:
Blot with a dry cloth to remove any remaining liquid.
Step #5: Allow Drying:
Let the area air dry.
Step #6: Repeat If Necessary:
If needed, repeat the process.
Step #7: Final Vacuum:
Once the stain is gone and the carpet is dry, vacuum the area.
Remember, the 1001 Carpet Care Stain Remover is your ally in tackling those stubborn blood stains!
